Tugas Berat G80 Industrial Lifting G80 Alloy Steel Hoist Chains untuk Dijual
Tugas Berat G80 Industrial Lifting G80 Alloy Steel Hoist Chains untuk Dijual
kategori
Permohonan
Produk Berkaitan
Parameter Rantaian
Rangkaian SCIC Gred 80 (G80) untuk mengangkat dibuat mengikut piawaian EN 818-2, dengan keluli aloi mangan nikel kromium molibdenum bagi setiap piawaian DIN 17115; reka bentuk / dipantau kimpalan & rawatan haba memastikan rantaian sifat mekanikal termasuk daya ujian, daya pecah, pemanjangan & kekerasan.
Rajah 1: Dimensi pautan rantai gred 80
Jadual 1: Dimensi rantai Gred 80 (G80), EN 818-2
| diameter | padang | lebar | berat unit | |||
| nominal | toleransi | p (mm) | toleransi | dalaman W1 | luar W2 | |
| 6 | ± 0.24 | 18 | ± 0.5 | 7.8 | 22.2 | 0.8 |
| 7 | ± 0.28 | 21 | ± 0.6 | 9.1 | 25.9 | 1.1 |
| 8 | ± 0.32 | 24 | ± 0.7 | 10.4 | 29.6 | 1.4 |
| 10 | ± 0.4 | 30 | ± 0.9 | 13 | 37 | 2.2 |
| 13 | ± 0.52 | 39 | ± 1.2 | 16.9 | 48.1 | 4.1 |
| 16 | ± 0.64 | 48 | ± 1.4 | 20.8 | 59.2 | 6.2 |
| 18 | ± 0.9 | 54 | ± 1.6 | 23.4 | 66.6 | 8 |
| 19 | ± 1 | 57 | ± 1.7 | 24.7 | 70.3 | 9 |
| 20 | ± 1 | 60 | ± 1.8 | 26 | 74 | 9.9 |
| 22 | ± 1.1 | 66 | ± 2.0 | 28.6 | 81.4 | 12 |
| 23 | ± 1.2 | 69 | ± 2.1 | 29.9 | 85.1 | 13.1 |
| 24 | ± 1.2 | 72 | ± 2.1 | 30 | 84 | 14.5 |
| 25 | ± 1.3 | 75 | ± 2.2 | 32.5 | 92.5 | 15.6 |
| 26 | ± 1.3 | 78 | ± 2.3 | 33.8 | 96.2 | 16.8 |
| 28 | ± 1.4 | 84 | ± 2.5 | 36.4 | 104 | 19.5 |
| 30 | ± 1.5 | 90 | ± 2.7 | 37.5 | 105 | 22.1 |
| 32 | ± 1.6 | 96 | ± 2.9 | 41.6 | 118 | 25.4 |
| 36 | ± 1.8 | 108 | ± 3.2 | 46.8 | 133 | 32.1 |
| 38 | ± 1.9 | 114 | ± 3.4 | 49.4 | 140.6 | 35.8 |
| 40 | ± 2 | 120 | ± 4.0 | 52 | 148 | 39.7 |
| 45 | ± 2.3 | 135 | ± 4.0 | 58.5 | 167 | 52.2 |
| 48 | ± 2.4 | 144 | ± 4.3 | 62.4 | 177.6 | 57.2 |
| 50 | ± 2.6 | 150 | ± 4.5 | 65 | 185 | 62 |
Jadual 2: Sifat mekanikal rantai Gred 80 (G80), EN 818-2
| diameter | had beban kerja | daya bukti pembuatan | min. daya pecah |
| 6 | 1.12 | 28.3 | 45.2 |
| 7 | 1.5 | 38.5 | 61.6 |
| 8 | 2 | 50.3 | 80.4 |
| 10 | 3.15 | 78.5 | 126 |
| 13 | 5.3 | 133 | 212 |
| 16 | 8 | 201 | 322 |
| 18 | 10 | 254 | 407 |
| 19 | 11.2 | 284 | 454 |
| 20 | 12.5 | 314 | 503 |
| 22 | 15 | 380 | 608 |
| 23 | 16 | 415 | 665 |
| 24 | 18 | 452 | 723 |
| 25 | 20 | 491 | 785 |
| 26 | 21.2 | 531 | 850 |
| 28 | 25 | 616 | 985 |
| 30 | 28 | 706 | 1130 |
| 32 | 31.5 | 804 | 1290 |
| 36 | 40 | 1020 | 1630 |
| 38 | 45 | 1130 | 1810 |
| 40 | 50 | 1260 | 2010 |
| 45 | 63 | 1590 | 2540 |
| 48 | 72 | 1800 | 2890 |
| 50 | 78.5 | 1963 | 3140 |
| nota: jumlah pemanjangan muktamad pada daya putus ialah min. 20%; | |||
| perubahan Had Beban Kerja berhubung dengan suhu | |
| Suhu (°C) | WLL % |
| -40 hingga 200 | 100% |
| 200 hingga 300 | 90% |
| 300 hingga 400 | 75% |
| lebih 400 | tidak boleh diterima |
Pemeriksaan Tapak
Perkhidmatan Kami
Lebih lanjut mengenai kami:
